A technology-based enterprise integrating the research and development, production and sales of new materials for ceramics and cast steel products.
Origin of Ceramic Inner Cylinder Hanging Plate
Release time:
2021-12-27
In order to adapt to the structural characteristics of modern exterior wall external insulation and meet the modern construction system with simple construction and easy quality control, the ceramic inner cylinder hanging board system came into being. The ceramic inner cylinder hanging board system is similar to the principle of stone curtain wall, and its support system and panel do not bear the load of the main structure. In addition to safety assurance, another obvious advantage of this system is that it can significantly improve the thermal and sound insulation properties of the wall.
After the emergence of modern reinforced concrete structures, brick walls lost their bearing function and were more replaced by other filling materials. Out of the pursuit of the traditional brick wall effect, in order to meet the light and thin requirements pursued by modern facing materials, facing bricks with similar surface effects but thinner thickness have appeared. There are many types of tiles, especially interior decorative tiles. With the development of science and technology, the tiles are getting bigger and bigger, the patterns are getting more and more realistic, and the forms are getting more and more.
Ordinary bonded wall tiles have some fatal defects due to their own structural defects, such as: the specifications cannot be too large, if the specifications are too large, the risk of falling will be greatly increased; When used in outdoor walls, due to long-term rainwater immersion and multiple freeze-thaw cycles in winter, it is easy to cause the tiles to fall off from the joints and seriously affect the safety of personnel. Too dependent on manual construction, labor-intensive and quality difficult to control, often bring more security risks. Due to the improvement of energy-saving requirements, most buildings adopt external insulation structure, which also makes the number of external wall tiles more limited.
In order to adapt to the structural characteristics of modern exterior wall external insulation and meet the modern construction system with simple construction and easy quality control, the ceramic inner cylinder hanging board system came into being. The ceramic inner cylinder hanging board system is similar to the principle of stone curtain wall, and its support system and panel do not bear the load of the main structure. In addition to safety assurance, another obvious advantage of this system is that it can significantly improve the thermal and sound insulation properties of the wall.
1. Production process and environmental impact
Artificial porcelain plate: Ceramics are made by pressing and sintering inorganic non-metallic solid materials with different composition ratios (even waste reuse), and the impact on the natural environment is relatively small.
Natural stone: directly mined from the mine, it has a great impact on the surface, and the dust generated during the processing also has a great negative impact on the environment.
2. Strength comparison
Ceramic inner cylinder hanging plate: through the dry pressure of the powder, its composition is completely evenly distributed, so the production of porcelain plate texture is uniform, uniform, no weak links, not easy to damage stress concentration and other phenomena. In addition, the strength of the porcelain plate itself is also very high. The relevant porcelain plate specifications formulated by the state require that the modulus of rupture is greater than 27mpa, which is far greater than the 8Mpa required by the stone.
Natural stone: Because natural stone is produced under natural conditions, natural stone has heterogeneity in structure and composition. When damaged by external force, it is easy to appear local damage stress concentration point, accelerate the damage of the plate. In the relevant technical standards for stone curtain walls formulated by the state, only the modulus of rupture is required to be greater than 8Mpa.
3. Comparison of dead weight and load
Ceramic inner cylinder hanging plate: high strength porcelain plate, specification requirements greater than 12mm. This advantage: First, it reduces the bearing capacity requirements of the building foundation; second, due to the small thickness and low weight of the board, its weight is about 25kg per square meter. It greatly reduces the labor intensity of workers, improves the efficiency of on-site installation, and can effectively shorten the construction period.
Natural stone: Due to its low strength, it is necessary to increase its thickness to ensure its safety, which causes the dry-hanging stone of the building to bear a very large load.
Key words:
Ceramic inner cylinder hanging plate
Xinghua Xingdong Cast Steel Co., Ltd
Address
Diduo Industrial Park, Xinghua City, Jiangsu Province
Telephone
Copyright: Xinghua Xingdong Casting Steel Co., Ltd.